Written By : Nikki Kumari

We cannot avoid the built industries, but we can avoid those explosions happening through gas monitoring. Gas monitoring could be a considerable measure to be taken to avoid these explosions. Well, what is gas monitoring? Let’s get to know about it below.

What Is a Gas Monitoring System?

A gas monitoring system is a device that is designed in a way that it can detect harmful gases, and the latter is connected to alarms that will ring if detected. There are two types of gas monitors portable and fixed gas monitoring systems.

Can use those for harmful gases, combustible and toxic gases, to avoid accidents happening. The Gas Monitoring System is mainly designed to detect the target gas present in the environment. Now, this will help you to a greater extent by making you aware of accidents happening further.

Gas Monitoring Equipments

Gas monitoring equipment, also known as gas detectors, is used to detect the amount of toxic gas present in your environment to provide you with safety means. There are many Gas monitoring equipment; let’s have a look at it:

1. Portable Multi-Gas Meter

The portable multi-gas meter is a gas monitoring equipment that is designed in such a way to detect various gases at the same time. They are portable too that can be carried anywhere and can be used. The major gases detected by portable multi-gas meters are oxygen, carbon monoxide, hydrogen sulphide, and flammable gases.

The portable multi-gas meter is used for a limited area and can be monitored by SENKO MGT. The updated portable multi-gas meter’s sensors are fitted with multiple gases like VOC/PID sensor, carbon dioxide and oxygen sensors. However, these gas detectors can be used in IVF medical facilities, hospitality and drinks industries.

2. Landfill Gas Analyzer 

Moving ahead with landfill gas analyser, which can detect the contaminated gas in the air. It can help you monitor well and help detect some gases like H2S, O2, CO, CO2, and CH4. In the below article, we’ll look at some of the most significant characteristics of landfill gas analysers.

It can detect all the gases simultaneously by detecting the percentage of CO2, O2 and CH4. Meanwhile, it can monitor six gases with the memory of 2000 IDs and 4000 readings. Although it can measure barometric and relative pressure, it is certified by MCERTS, ATEX, CSA, UKAS and IECEx calibration. A landfill gas analyser is mainly used in analysing biogas.

3. Ambient Gas Monitors 

Well, ambient gas monitors are mainly used to detect Nitrogen oxide, but no matter it can also detect the gases like SO2, Ozone, Methane, Ammonia, CO2, CO and non-methane hydrocarbons. To identify gases from a source, chemiluminescent is one such technology.

For a fact, ambient gas monitors can correct temperature and pressure accordingly in the space you are in. Meanwhile, it can also set an alarming level on the demand of users for concentration. These types of gas monitoring equipment can be used in medical fields, glass industries, welding and cutting industries, food industries, laser technology and thermal processing.

Five Reasons For Using Gas Monitors

As mentioned, that gas monitors have become a necessity rather than wanting it. Gas monitors must be installed immediately to prevent further toxic and hazardous explosions.

1. Toxic Gas Monitoring 

In the industries like auto chemicals or parking garages, there are chances that harmful gases like H2S and CO may be present. It would further lead to a greater explosion. To avoid it from happening, you should be aware that it’s going to happen. However, to monitor you, you have to install a gas monitoring system. These gas detectors will be providing you with a daily report about different types of gases present around you. If it detects, then it will ring a loud alarm so that you can take early measures to avoid further accidents happening.

2. Detection of Proper Amount of Oxygen 

As we all know that human beings require a minimum amount of 21% of oxygen to live. There are places where workers work underground or in crowded areas with reduced oxygen levels. The lack of oxygen means it could lead to dizziness for workers, lead to dehydration, or be the reason for their death. The oxygen detector is required to give you a daily report of oxygen present in your surroundings or ring an alarm to pause work until you replace the other gas with oxygen that has overtaken the surroundings to prevent any such situation.

3. To Detect Flammable Gas 

Flammable gases are considerably more dangerous than other gases as they could travel a long distance in just a short period. They are so dangerous that it could directly lead as it displaces oxygen and create a toxic environment. Thus, a gas monitoring system can help you know that the flammable gas reaches more than 10% LEL. It could help you avoid explosions by taking earlier measures like switching on ventilator fans and switching off the tools.

4. Duct and Tool Monitoring to Save Lives of Workers 

Without denying the fact, the manufacturing and semiconductor Tool industries release much toxic and flammable gas. As we have already seen through some examples, this injures workers very badly and leads to death. It also keeps people threatened for years. To avoid it happening from at least today, go ahead with using a gas monitoring system. It could help to make you aware before any leakages happen further.

5. Domestic Gas Monitoring 

Toxic gases don’t need to be only released in the factories or industries; they can happen in your house too, don’t forget that you have an LPG cylinder. Even this has been the cause of death for many people. There happen many times that you get to know if any leakages are happening in your home. But till now you are luckily getting saved but to avoid further accidents, install a gas monitoring system today.

How To Make Amazon Alexa Routine
How To Fully Automate Your Home Using Google Assistant

Top 5 Ways IFTTT Can Help Make Your Home Safe